ISO 10816: For measurements with Accelerometers. Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts:

Part 1: General guidelines

Part 2: Large land-based steam turbine generator sets in excess of 50 MW

Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 and 1800 revolutions per minute when measured in-situ

Part 4: Gas turbine driven sets excluding aircraft derivations

Part 5: Guidelines for hydraulic turbine machine sets

Part 6: Reciprocating machines with power ratings above 100 kW

Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts


ISO 7919: For measurements with Proximity Probes. Mechanical vibration of non-reciprocating machines – Measurement on rotating shafts and evaluation criteria:

Part 1: General guidelines

Part 2: Large land-based steam turbine generator sets

Part 3: Coupled industrial machines

Part 4: Gas turbine sets

Part 5: Machine sets in hydraulic power generating and pumping plants


API 617 : Axial and Centrifugal Compressors and Expander-compressors : Axial compressors, single-shaft and integrally geared process centrifugal compressors, and expander-compressors for use in the petroleum, chemical, and gas industries services that handle air or gas.

Part 1—General Requirements, contains information pertinent to all equipment covered by the other parts of this document.

Part 2—Non-integrally Geared Centrifugal and Axial Compressors, specifies requirements for non-integrally geared centrifugal and axial compressors, in addition to the general requirements specified in API 617, Part 1. These machines do not have gears integral with their casing but can have external gears.

Part 3—Integrally Geared Centrifugal Compressors, specifies integrally geared centrifugal compressors in conjunction with API 617, Part 1.

Part 4—Expander-compressors, specifies requirements for expander-compressors, in addition to the general requirements specified in Part 1.